GM300 Ignition Enable/Disable????

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
SOC
Posts: 233
Joined: Tue Mar 26, 2002 4:00 pm
What radios do you own?: GP300,HT1000, GM300, MT1000,

GM300 Ignition Enable/Disable????

Post by SOC »

I have a GM300 i just got today, and it wont power on, the guy told me it should need the igniton pin on the accessory, how do i set this up to use inside as a base? do i need to jump the pin or what do i do?
Top
motorola_otaku
Posts: 1854
Joined: Tue Jan 13, 2004 7:03 am

Post by motorola_otaku »

Run a wire off Pin 10 on the accessory connector to 12v+, and you're good.
Top
RFguy
Posts: 1357
Joined: Wed Dec 21, 2005 6:17 am

Post by RFguy »

Search for GM300 and Fuse. Here are some results

http://batboard.batlabs.com/viewtopic.p ... gm300+fuse

http://batboard.batlabs.com/viewtopic.p ... gm300+fuse

http://batboard.batlabs.com/viewtopic.p ... gm300+fuse
Top
SOC
Posts: 233
Joined: Tue Mar 26, 2002 4:00 pm
What radios do you own?: GP300,HT1000, GM300, MT1000,

How to turn off the igniton connector

Post by SOC »

Ok i determined the radios igniton connector has to be powered, how can i turn this off?

Thanks guyz
Top
User avatar
rrfd43
Posts: 434
Joined: Wed Mar 06, 2002 4:00 pm
What radios do you own?: Cobra 25 LTD Classic with echo

Post by rrfd43 »

If I remeber this is a fuse cut or trace cut on the pc board. Just hook the accessory wire to the same spot as your mail power and you will be all set. Just a lot harder to change it back.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”