Saber Question

[meterman305]

I have a Saber 1 with a 438-470 split and a Saber 3 with a 403-430 split. Can I switch parts from the Saber 1 into the Saber 3 to bring the Saber 3 into the 438-470 split so it will be useful to me?

Thanks for any assistance, Joe.

[Tom in D.C.]

Joe:

Just switch the cases and the interior front shields between
the radios. Your Saber 1 will become a 430-470 Saber 3 and
your new Saber 1 403-433 can be used as a doorstop.

You may also find some references on this Board over the
past several years on this exact subject if you do a search.

If both radios are tuned up and working okay this should be
a quick and easy operation, although getting the ribbon
connectors connected when you put the shields back on can
be a tedious process. Go slow and don't bend any pins.

[FireCpt809]

Here is about the most informative page out there about Sabers. Co authored by one of our board members ..

http://www.repeater-builder.com/motorol ... index.html

[meterman305]

Thanks for the help. I will give it a try.