cdm-1550 Passport and Scan

Mikey · Post by **Mikey** » Mon Feb 26, 2007 7:54 pm

Can you scan both Passport Trunked Channels and Conventional Channels on a CDM-1550 LS+ at the same timer ? If so how do i program it to do it? I cannot get it to scan Both Trunking and Conventional at the same time

Mikey

ve3nsv · Post by **ve3nsv** » Mon Feb 26, 2007 8:02 pm

The answer is no. Not sure if this is capable with the Scholer-Johnson Passport boards but definitely not an option with the CDM / HT series.

HLA · Post by **HLA** » Mon Feb 26, 2007 8:48 pm

yes it can, open your scan list and where you select your conventional channels to scan, go all the way down to the bottom and there will be your trunked systems to select. after that the talkgroup will open up and you will be able to select that.

ve3nsv · Post by **ve3nsv** » Tue Feb 27, 2007 10:15 am

Isn't that for LS-Trunking aka LTR and not Passport?

Mikey · Post by **Mikey** » Tue Feb 27, 2007 4:27 pm

I would like to Scan 2 talkgroups in a system and the 2 conventional channels that i have programmed in. i don't think it will scan Passport and Conv. but i thought i would ask to see if anybody had any clues. I'm kinda new to the whole Passport Thing.

Mikey

ve3nsv · Post by **ve3nsv** » Tue Feb 27, 2007 6:57 pm

You won't be able to scan the conventional and Passport channels together. You also won't be able to scan both Passport groups together unless they are homed on the same home repeater.