Removing a trunking system MTS2000

[High_order1]

I have searched repeatedly, but guess my board-fu is weak. Somehow, I have managed to coax the codeplug out of my project radio. I want to delete the UHF trunking system in it, and simply have a conventional radio.

I can get access to that systems' key if necessary.

I vaguely recall that there has to be one system or something peculiar like that. I tried putting a couple of token conventional modes in it, and then delete the trunking system, but no joy.

radio firmware is 5.13 /.14 thereabouts, and to be honest this thing has been such an unholy pain in my ass, toolproofing would be a welcome relief.

Thanks and sorry I couldn't find the pertinent threads on my own.

-Shawn

[wavetar]

There has to be at least one trunked system in the radio, but you can simply leave it 'sitting there' and only assign conventional personalities to the zone/channel assignment field. If you really want to get rid of it, you could turn it into an MT2000...that's about the only way.

Todd