Remote accessory pin outs for GM300

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
proff
Posts: 91
Joined: Sun Jul 16, 2006 10:53 pm
What radios do you own?: Maxon,Motorola,Kenwood,uniden

Remote accessory pin outs for GM300

Post by proff »

I know this is a item i should have
I am fitting a remote mic and PTT and speaker on a GM300 and some one has taken off with the Pin out and numbering order for the accessories socket at the rear of the radio.
has any one got this info?
Allen C
find me on 27.405 Mhz USB
User avatar
Pimpala03
Posts: 259
Joined: Sun Nov 19, 2006 5:42 pm
What radios do you own?: M1225, HT100, P1225, etc

Post by Pimpala03 »

Image
In God we trust. Everyone else, we run through NCIC, Thinkstream, and III.
proff
Posts: 91
Joined: Sun Jul 16, 2006 10:53 pm
What radios do you own?: Maxon,Motorola,Kenwood,uniden

gm300 PIN OUTS

Post by proff »

Thanks
the radio is going in a racing boat.
its abit of different fun.
when transmitting the PTT on pin 3 goes to what pin?
Allen C
find me on 27.405 Mhz USB
User avatar
HumHead
Moderator
Posts: 1769
Joined: Tue Sep 25, 2001 4:00 pm

Post by HumHead »

Ground
Amateurs train until they can do it right. Professionals train until they cannot do it wrong.
proff
Posts: 91
Joined: Sun Jul 16, 2006 10:53 pm
What radios do you own?: Maxon,Motorola,Kenwood,uniden

gm300 accessories socket

Post by proff »

I did work that out , for some stipid reason i was reading the plug from the rear. didn't see the numbering on the bottom.
everything worked out find
the boat is on the water over the weekend racing
Allen C
find me on 27.405 Mhz USB
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”