repeater / car to car

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
Whatever1
Posts: 3
Joined: Thu Feb 15, 2007 4:49 am

repeater / car to car

Post by Whatever1 »

I know this is a basic question and I should know it but....

How would you program a repeater channel and a car to car channel.
The repeater freqs are Rx 170.0000 / Tx 173.0000

Thanks
Top
User avatar
Pimpala03
Posts: 259
Joined: Sun Nov 19, 2006 5:42 pm
What radios do you own?: M1225, HT100, P1225, etc

Post by Pimpala03 »

You need to first get authorization for the system.

You need to find out what kind of PL/DPL, etc is used on the system.

Car to Car might be simplex on the output frequency of the system.

As far as how to specifically program it to your radio... it's a different story.
In God we trust. Everyone else, we run through NCIC, Thinkstream, and III.
Top
User avatar
Bruce1807
Posts: 1203
Joined: Mon Jan 16, 2006 7:18 am

Post by Bruce1807 »

TX 170.0000
RX 173.0000
for the repeater + any PL/DPL or whatever signaling is required.

We normally program the repeater rx frequency as a talkaround
Top
User avatar
smokeybehr
Posts: 114
Joined: Wed Jun 20, 2007 4:07 pm
What radios do you own?: Dozens. Want one? Email me.

Re: repeater / car to car

Post by smokeybehr »

It depends on the radio. Some radios have a T/A setting that you can program in the talkaround (repeater output) channel into the same mode. Others, you'll have to dedicate a channel each to the repeater and T/A frequency pairs.
No, I will not fix your computer. Call back during NORMAL business hours.
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”