Moflags to Bitbanging

[bondo]

I would still like to find other useful memory locations for BITBANGing. I expect all the old MOFLAGs map to some location in the radio. I just don't know what they are.
Does anyone have a memory location breakdown of where other features are changeable using bitbanging software. I would like to add scan, MPL ,etc.. but only have access to lab with bitbanging..

Any help would be greatly appreciated...

[RESCUE161]

Did you see this?

http://batboard.batlabs.com/viewtopic.php?f=1&t=22696

natedog224 pretty much ripped the Spectra Moflag thing apart. Have fun.

[bondo]

I guess I am confused... I read those posts but still do not understand how the moflags convert to an address to be able to bitbang ?

Am I missing something fundemental ?

Thank's

[JAYMZ]

The MOFLAG string is together in a location on the MLM and the Command Board. Think of the MOFLAG string like a Flashcode. It tells the radio what options in the firmware that can be used and what can't be used. Just like flipping a set of dip switches.

[bondo]

Ok I got it, Thank's Alex.... All my options work with the exception of scan.... This a convential 900Mhz Spectra... Any Ideas ?

[motorola_otaku]

What version of firmware is the MLM running?

Also, did this radio start out as a B2 or C2 model? Those won't scan no matter what you do to them with moflagging or bitbanging, without swapping MLMs.

[bondo]

Is there an easy way to tell the firmware, or do you need to read it off the mlm board ?

Thank's

Randy

[JAYMZ]

Read it off the tag on the MLM.

[bondo]

Pulled it out... Tag gone from back side.... Also pin broke while removing.... Dreaded FL 01/90....
All done unless I can find another MLM board....

Thank's for the Help

Randy