david clark headset adapter pin out

[ems46pa]

looking for a pin out diagram for a david clark Model C3019 headset adapter, units will be wired to an M1225, and a CDM any help would be appretiated

[Spanky]

Have you received a reply? I too am looking for this info. I have found that the mating cable, C3821 is wired as follows:
Green - Audio Hi
Black - Audio Low
Red - Mic Hi
White - Mic Low
Yellow - Ptt Hi
Blue - Ptt Low

I don't know if these colors match the end of the C3019 cable, but they should.

[snubber]

I also have the C3019 that needs to be connected to a cdm1250. All the colors match as listed above, with the exception that no blue wire is contained. Instead there is a brown shielded lead. Could this be the ptt low lead, or do I have an altogether different cable?

Update 8/29/07: Contacted David Clark and they promptley sent a diagram outlining the same as above. No brown wire shown so I will ohm out the plugs just to be sure.