GM1200 internal fuse

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
denis
On Moderation
Posts: 25
Joined: Mon Sep 09, 2002 9:39 am

GM1200 internal fuse

Post by denis »

hi all i have a GM1200 but it is impossible to light on.
the pins in the plug are ok, the cotrole head is ok

i think is the internal fus is brocken, do you have the shema or the location to this fuse :-?

thank you
Andreas
Posts: 626
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: radios

Re: GM1200 internal fuse

Post by Andreas »

There´s no fuse as I know.Look for bad solder joints at the power connector and the voltage regulators.
You must have the plug with the bridge on the downside of the radio.
If this will not fix it,try to flash the radio with new firmware.

Andreas
denis
On Moderation
Posts: 25
Joined: Mon Sep 09, 2002 9:39 am

Re: GM1200 internal fuse

Post by denis »

hi

thank you for the information, i find the problem
but i have an other one the vol buton if broken

bye
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”