I created a new codeplug for my astro R. When I created the system I set the affilation to disabled and programed in the Control Channels (CC) for one tower in the type II system. I then created my TG lists and then my scan lists (2). The unit scans ok and get all the TG I programed in for one list. So my firt question is whay can I not scan both lists for a total of 20 TG. Like why does it let me have two scan list but I can only scan one?
Next with the same code plug as above I save it as a differnt name and then go in and set the concentric rocker to TX inhibit on both sides. I then go and change the affilation type to Wide Area (I forget what RSS calls it some thing like WASS I think). I then add the CC for two more towers for a total of three towers (same system). I also set one of the side buttons for site display/search and one for site lock/unlock. But when I scan it will not scan lock on any TG except for the TG I am parked on with the rotary. I am using RSS 8.5 and the Astro is a limited key pad and I have set it up for scan programing. Anyone have an idea why it wont scan? Do I have to start the codeplug from scrach as WASS affialtion. If so I might as well start as smartzone and then roll it back to WASS. Will this help?
Thanks, Joe