GM360 codeplug error
Moderator: Queue Moderator
GM360 codeplug error
hi. i have a gm360 low band radio model MDM25CKF9AN5AE that belongs to my volunteer fire brigade that indicates "codeplug error". i need help to fix it . i have the rib, soft and cables but i think it´s necessary flash it. if you can help me i´ll be gratefull. thanks, jorge
Re: GM360 codeplug error
Try to program it with a default codeplug.If this will not work,try to read and save the tuning parameters.
Got the lab flashtool with the proper codeplugs and firmware and program a new codeplug (Phase3 to Phase 3 and/or hardware codeplug,application codeplug only).Flash the firmware and set the regionalcode to EMEA.
Start the tuner set the old serial number and load the tuning parameters back into the radio.
Andreas
Got the lab flashtool with the proper codeplugs and firmware and program a new codeplug (Phase3 to Phase 3 and/or hardware codeplug,application codeplug only).Flash the firmware and set the regionalcode to EMEA.
Start the tuner set the old serial number and load the tuning parameters back into the radio.
Andreas