Page 1 of 1
GM360 codeplug error
Posted: Mon Jul 23, 2007 10:32 am
by lujorsan
hi. i have a gm360 low band radio model MDM25CKF9AN5AE that belongs to my volunteer fire brigade that indicates "codeplug error". i need help to fix it . i have the rib, soft and cables but i think it´s necessary flash it. if you can help me i´ll be gratefull. thanks, jorge
Re: GM360 codeplug error
Posted: Mon Jul 23, 2007 2:22 pm
by Andreas
Try to program it with a default codeplug.If this will not work,try to read and save the tuning parameters.
Got the lab flashtool with the proper codeplugs and firmware and program a new codeplug (Phase3 to Phase 3 and/or hardware codeplug,application codeplug only).Flash the firmware and set the regionalcode to EMEA.
Start the tuner set the old serial number and load the tuning parameters back into the radio.
Andreas