how to find a part number on a rf board?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Screwed
Posts: 148
Joined: Wed Aug 06, 2003 12:47 pm

how to find a part number on a rf board?

Post by Screwed »

cant find a ntn number on them but i believe they are 800mhz. where would i find out what it is
Screwed
Posts: 148
Joined: Wed Aug 06, 2003 12:47 pm

Re: how to find a part number on a rf board?

Post by Screwed »

Image
User avatar
txshooter
Posts: 881
Joined: Mon Apr 15, 2002 7:15 am

Re: how to find a part number on a rf board?

Post by txshooter »

The white sticker should have a part number on it. Whats the part number? There should be numbers other than a NTN number.
Scott B.
"Never argue with seven men when you are carrying a six shooter..."
AEC
No Longer Registered
Posts: 1889
Joined: Wed Dec 22, 2004 7:56 pm

Re: how to find a part number on a rf board?

Post by AEC »

All the information IS on the tag, on the right side usually, and that number chages with the band of the RF board.

From UHF to VHF and 800/900 Mhz, there will be a different number associated with that RF board.

The PA also tells a story...if it has a 'V' on its case, its a VHF board, the UHF ones of course have a 'U' and so on..

Im' sure Batlabs info can indicate exactly what board you have if you use that number.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”