HT,MT,XTS connector part # needed

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
20C10
Posts: 6
Joined: Wed Jul 13, 2005 4:43 am

HT,MT,XTS connector part # needed

Post by 20C10 »

Does any one know if the Jedi style spkr mic connector that attaches to the radio can be ordered without the cable attached?I need to make up a programming cable for an EF Johnson radio, it uses the same connector. The connector would also need to have all of the pins with it. Motorola Spkr mic is not fully populated with pins. Who makes this connector?
Thanks for reply.
Top
User avatar
txshooter
Posts: 881
Joined: Mon Apr 15, 2002 7:15 am

Re: HT,MT,XTS connector part # needed

Post by txshooter »

Doesn't the EF Johnson cable have a small circuit board on either end of the cable?
Scott B.
"Never argue with seven men when you are carrying a six shooter..."
Top
20C10
Posts: 6
Joined: Wed Jul 13, 2005 4:43 am

Re: HT,MT,XTS connector part # needed

Post by 20C10 »

The cable is a straight through type for the model 5100. All the circuitry is in the radio.
I am in process of drilling out a spkr mic connector. Should work out ok if I take my time.
Thanks, Dale
Top
Post Reply

Return to “Radio Programming”