Page 1 of 1

HT,MT,XTS connector part # needed

Posted: Wed Sep 19, 2007 10:33 am
by 20C10
Does any one know if the Jedi style spkr mic connector that attaches to the radio can be ordered without the cable attached?I need to make up a programming cable for an EF Johnson radio, it uses the same connector. The connector would also need to have all of the pins with it. Motorola Spkr mic is not fully populated with pins. Who makes this connector?
Thanks for reply.

Re: HT,MT,XTS connector part # needed

Posted: Wed Sep 19, 2007 11:33 am
by txshooter
Doesn't the EF Johnson cable have a small circuit board on either end of the cable?

Re: HT,MT,XTS connector part # needed

Posted: Wed Sep 19, 2007 11:45 am
by 20C10
The cable is a straight through type for the model 5100. All the circuitry is in the radio.
I am in process of drilling out a spkr mic connector. Should work out ok if I take my time.
Thanks, Dale