HMN 1056D Maxtrac Mic to a Syntor-x

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
n3chu
Posts: 113
Joined: Mon Jan 26, 2004 5:09 pm

HMN 1056D Maxtrac Mic to a Syntor-x

Post by n3chu »

Hi All, Does anyone have a schematic on how to adapt a 1056D Maxtrac mic to a syntor-x?? Hopefully some one may have scratched it on a piece of paper. Any help would be appreciated
. Thank you all. Davie n 3 chu AT atlanticbb dot net
A Stranger is just a friend you havent met yet
Top
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: HMN 1056D Maxtrac Mic to a Syntor-x

Post by Jim202 »

If you go to http://www.batlabs.com and then select the radio info and then go to the mobile
selection, you will find the Syntor. near the top of the information is the mic info.

jim


n3chu wrote:Hi All, Does anyone have a schematic on how to adapt a 1056D Maxtrac mic to a syntor-x?? Hopefully some one may have scratched it on a piece of paper. Any help would be appreciated
. Thank you all. Davie n 3 chu AT atlanticbb dot net
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”