Hi, I have a STX 821 radio, model H35JNC5170CN, and I would like to program it to monitor a local system and am clueless as to exactly what I need to do.
Anyone who can help me, please post a email addy, or send me a private message via the batlabs thing and I'll explain what I would like to do and so on........
STX RADIO HELP
Moderator: Queue Moderator
Hi:
Unless your radio has undergone some
extensive changes, the JNC models really
are not STX821's.
You can look to see if yours has a GReen
Logic Board and see what firmware is on the
IC.
Unfortunitely, the Label on the front can
easily be replaced. The model on the other hand is a different issue
However, most if not all JNC's series were a
Type 1 radio only, and most systems now use
type ll, or lli
I do have a few Enahanced STX821's if you
are intersted if yours has not been upgraded
Monty
Unless your radio has undergone some
extensive changes, the JNC models really
are not STX821's.
You can look to see if yours has a GReen
Logic Board and see what firmware is on the
IC.
Unfortunitely, the Label on the front can
easily be replaced. The model on the other hand is a different issue
However, most if not all JNC's series were a
Type 1 radio only, and most systems now use
type ll, or lli
I do have a few Enahanced STX821's if you
are intersted if yours has not been upgraded
Monty