Batboard

hi, i have an xts2500 model 3 380-470mhz, just wondering if it was possible to progam freqs above 470mhz. also, would anyone know how much it would be to get ADP encryption flashed in this radio? this radio's flashcode alrewady indicates hardware encryption. any help is really appreciated. thanks

It can be brought up to about 479-ish on tx..

-Marc

Wow! How could this mod be accomplished? I've read that there is something with the software but i cannot make any sense of it. Thanks for your reply.

Go to http://www.batlabs. com and then go to Model Specific Information, then
click on "XTS" In that section you will find information about what you want
to do, which involves hex editing the Windows CPS program for the 2500. The data is
not all that up-to-date but it should get you started.

hi again, i'm using the hex workshop but i'm having trouble with the saving as and renaming process. all i see on the workshop screen is a bunch of numbers and letters that don't make sense. the program is running normal it's just that i don't understand it. if someone could walk me through this i would greatly appreciate it alot. thanks in advance.

hello fellows,

I've been trying high and low how to do this mod but to no avail. I went on to the main BatLabs site and spent hours trying to understand it and still, huge bump. I'm a complete dumb#%! on these things. I also downloaded the Hex Editor program and cannot make heads or tals of it either. What sould I do? Thanks for your patience. Scooby-70