Page 1 of 1
keyloading XTS3000 with DX loader
Posted: Tue Dec 18, 2007 9:32 pm
by wazzzzzzzzup
ok i did a search for this and didnt answer my question
some of the comments indicate the DX loader will work with XTS3000's other posts say depends of firmware host/dsp of XTS3000
if i were to buy a DX DES loader (factory or upgraded) what specs do i need to look out for on the P25 XTS3000 to make sure it will load a key?
thanks,
wazz
Re: keyloading XTS3000 with DX loader
Posted: Wed Dec 19, 2007 5:44 am
by batdude
as long as the flavor of your encryption matches the loader, and the loader is a "D"x - you will be fine.
T3011DX will load DES-XL and/or DES-OFB
Twhatever the number is ... is for DVP-XL
there are a few AES-equipped XTS3000's out there... you will need a KVL3000+ to load AES keys...
d
Re: keyloading XTS3000 with DX loader
Posted: Thu Dec 20, 2007 4:37 pm
by ScannerDan
Will the T3011DX also load code into the new XTL5000??
batdude wrote:as long as the flavor of your encryption matches the loader, and the loader is a "D"x - you will be fine.
T3011DX will load DES-XL and/or DES-OFB
Twhatever the number is ... is for DVP-XL
there are a few AES-equipped XTS3000's out there... you will need a KVL3000+ to load AES keys...
d
Re: keyloading XTS3000 with DX loader
Posted: Thu Dec 20, 2007 5:51 pm
by batdude
yes it will - when the radio is appropriately programmed.
d
Re: keyloading XTS3000 with DX loader
Posted: Thu Dec 20, 2007 6:08 pm
by ScannerDan
batdude wrote:yes it will - when the radio is appropriately programmed.d
That's good news thanks