Ressurecting ASIII from fail 01-82
Posted: Fri Dec 28, 2007 3:25 pm
Fellas
Well after 8 years of workin on these radios i finally bricked one of my personal radios. I was programming my ASIII with cps version 5.02.00 when the laptops battery died enough to corrupt the codeplug, upon power up the unit displays fail 01/82. I tryied cloning the radio as sombody syggested and short of sending it to the depot are there any tricks i can try? I have a buddy that works for a moto shop that may have lab to un-brick this but i have never had this happen to try the ressurect process. Do you have any suggestions or if anybody can point me to a past post as a "how to" . I looked in the archives but i am so ticked off right now i cant see straight.
As a side note if anybody works on thise on the side that i can send the radio to; if you could PM me that would be great.
Well after 8 years of workin on these radios i finally bricked one of my personal radios. I was programming my ASIII with cps version 5.02.00 when the laptops battery died enough to corrupt the codeplug, upon power up the unit displays fail 01/82. I tryied cloning the radio as sombody syggested and short of sending it to the depot are there any tricks i can try? I have a buddy that works for a moto shop that may have lab to un-brick this but i have never had this happen to try the ressurect process. Do you have any suggestions or if anybody can point me to a past post as a "how to" . I looked in the archives but i am so ticked off right now i cant see straight.
As a side note if anybody works on thise on the side that i can send the radio to; if you could PM me that would be great.