Happy new year to all.
I cannot figure out why I get squelch tail while in scan only. no problem when monitoring single channel. what am I missing? ALSO, I'm about to recase my HT1550xls, I once heard that silicone grease should be used on the seals prior to installation. any thoughts? thanks- John
HT1550 squelch tail? and re-case question
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: HT1550 squelch tail? and re-case question
are you shure it isn't the scan hold time?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: HT1550 squelch tail? and re-case question
Ah, never thought of that. thanks
Re: HT1550 squelch tail? and re-case question
JRUTA wrote:Happy new year to all.
I cannot figure out why I get squelch tail while in scan only. no problem when monitoring single channel. what am I missing? ALSO, I'm about to recase my HT1550xls, I once heard that silicone grease should be used on the seals prior to installation. any thoughts? thanks- John
there is an option within the scan window, which selects signaling on certain channels, i don't have the software infront of me, otherwise i'd be more specific... make sure if it allows you to select signaling, or pl, that it is set on Priority & Non-Priority channels...
Re: HT1550 squelch tail? and re-case question
thnks i will recheck it in cps