Page 1 of 1
HT1550 squelch tail? and re-case question
Posted: Tue Jan 01, 2008 3:55 am
by JRUTA
Happy new year to all.
I cannot figure out why I get squelch tail while in scan only. no problem when monitoring single channel. what am I missing? ALSO, I'm about to recase my HT1550xls, I once heard that silicone grease should be used on the seals prior to installation. any thoughts? thanks- John
Re: HT1550 squelch tail? and re-case question
Posted: Tue Jan 01, 2008 12:40 pm
by HLA
are you shure it isn't the scan hold time?
Re: HT1550 squelch tail? and re-case question
Posted: Wed Jan 02, 2008 6:02 pm
by JRUTA
Ah, never thought of that. thanks
Re: HT1550 squelch tail? and re-case question
Posted: Thu Jan 03, 2008 9:04 am
by libuff
JRUTA wrote:Happy new year to all.
I cannot figure out why I get squelch tail while in scan only. no problem when monitoring single channel. what am I missing? ALSO, I'm about to recase my HT1550xls, I once heard that silicone grease should be used on the seals prior to installation. any thoughts? thanks- John
there is an option within the scan window, which selects signaling on certain channels, i don't have the software infront of me, otherwise i'd be more specific... make sure if it allows you to select signaling, or pl, that it is set on Priority & Non-Priority channels...
Re: HT1550 squelch tail? and re-case question
Posted: Thu Jan 03, 2008 12:29 pm
by JRUTA
thnks i will recheck it in cps