Page 1 of 1
CPS - "Communication with radio failed" - HELP!
Posted: Wed Feb 13, 2008 7:03 pm
by Dogface
I'm having a problem trying to read a Astro Saber....When i select "Read device" in Astro Saber & XTS 3000 CPS (Ver R04.01.04) the radio itself displays "1 CSQ" the data light on the RIB flashes for a bit...and after about 1 or 2 minutes, i get "Communication with radio failed"!
Can anyone please lend a hand on this?!
Re: CPS - "Communication with radio failed" - HELP!
Posted: Wed Feb 13, 2008 7:31 pm
by Tom in D.C.
Start by trying different Com ports, like 4 instead of 1 which
is probably what you're set up for right now.
Any idea what CPS the radio was last programmed with?
Re: CPS - "Communication with radio failed" - HELP!
Posted: Thu Feb 14, 2008 4:19 pm
by groundrat99
Are all the cables in good shape? Do you have an AC adapter for the RIB or are you using batteries? I have had that problem where the radio starts to read and says 1 CSQ then fails with that error because the silly battery in the RIB was at its end.