Radius GM300 assist
Moderator: Queue Moderator
Radius GM300 assist
I have 2 Radius GM300 radios 16 ch UHF. Some genius tried to make them 32 ch by using Maxlab32 software. The radio will take program but will not rx or tx nor will it show a channel #. I was told the board needs to be blanked and re-initialized. I do not have the orig codeplug. I am looking for someone to get these 2 radios back to life for me. Please e-mail me [email protected] Thank You.
Re: Radius GM300 assist
You can use this procedure to make it a Maxtrac, it works.
http://www.batlabs.com/gmmax.html
I can do it if you don't want to tackle it. Send me a PM.
(make SURE it really is a 16ch with the removeable eprom)
Read this thread if you want to make it back into a GM300;
http://batboard.batlabs.com/viewtopic.php?f=1&t=58185
http://www.batlabs.com/gmmax.html
I can do it if you don't want to tackle it. Send me a PM.
(make SURE it really is a 16ch with the removeable eprom)
Read this thread if you want to make it back into a GM300;
http://batboard.batlabs.com/viewtopic.php?f=1&t=58185