Motorola R.I.C.K and IRLP

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Rayjk110
Banned
Posts: 1183
Joined: Thu Jan 06, 2005 4:10 pm

Motorola R.I.C.K and IRLP

Post by Rayjk110 »

Is it possible to hook up an IRLP interface to the 3rd accessory connector (the Maxtrac 16 pin style one) on the rear of a standard Motorola RICK?

I have a UHF GR300 repeater setup using a RICK, and would like to use the 3rd ACCY on the RICK to interface IRLP to my repeater, and I'm wondering if this is possible to do. Obviously Pin 8 would need to be COS (which is what the IRLP needs to work properly) - and I'm not sure what the pinout is on the RICK ACCY.


Thanks!
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”