Motorola R.I.C.K and IRLP
Posted: Fri Jun 20, 2008 12:12 pm
Is it possible to hook up an IRLP interface to the 3rd accessory connector (the Maxtrac 16 pin style one) on the rear of a standard Motorola RICK?
I have a UHF GR300 repeater setup using a RICK, and would like to use the 3rd ACCY on the RICK to interface IRLP to my repeater, and I'm wondering if this is possible to do. Obviously Pin 8 would need to be COS (which is what the IRLP needs to work properly) - and I'm not sure what the pinout is on the RICK ACCY.
Thanks!
I have a UHF GR300 repeater setup using a RICK, and would like to use the 3rd ACCY on the RICK to interface IRLP to my repeater, and I'm wondering if this is possible to do. Obviously Pin 8 would need to be COS (which is what the IRLP needs to work properly) - and I'm not sure what the pinout is on the RICK ACCY.
Thanks!