Jedi/Waris Antenna Adapter

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
W2MB
Posts: 83
Joined: Sun Feb 15, 2004 1:09 pm

Jedi/Waris Antenna Adapter

Post by W2MB »

I am looking for a Motorola adapter that would allow a BNC or SMA style connection to be made at the antenna port of Jedi and Waris series handhelds. If such adapters exist, a part number would be appreciated.
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: Jedi/Waris Antenna Adapter

Post by Al »

Motorola p/n 5885705M02 is a Waris to BNC adapter used for bench testing and evaluation. I believe the above p/n is the same as p/n HHLN4134, which also replaced the original ferrule-to-BNC adapter p/n HLN9756.
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: Jedi/Waris Antenna Adapter

Post by n7maq »

For the Jedi,

http://www.tessco.com/products/headerPr ... rchField=1

or

http://www.tessco.com/products/headerPr ... rchField=1

Do not use a "standard" BNC to SMA, Motorola uses their own version of SMA connectors. A standard SMA connector is not deep enough.

Jim
User avatar
W2MB
Posts: 83
Joined: Sun Feb 15, 2004 1:09 pm

Re: Jedi/Waris Antenna Adapter

Post by W2MB »

Thank you!
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”