I get codeplug error 53 from teh RSS when I try to read this radio. Model M33GMC29CAA. Do I have to blank the board with the Maxtrac software or can I fix it some other way?
Thanks,
Jason Stahls
VA3JSS
GP300 Error 53
Moderator: Queue Moderator
-
Jim2121
- Batboard $upporter
- Posts: 881
- Joined: Wed Dec 10, 2003 2:36 pm
- What radios do you own?: A few! Most I sign out!
Re: GP300 Error 53
Probably will not be of much help, Errors 51 though 58
is a indication of a Code Plug Corruption. Could be from the
Use of a Pentium Computer, Clone Rib or Clone Cable or a
combination of the above. (posted by Monty in 2002)
is a indication of a Code Plug Corruption. Could be from the
Use of a Pentium Computer, Clone Rib or Clone Cable or a
combination of the above. (posted by Monty in 2002)
Messages can't be intercepted if they aren't sent, can they?
Erwin Rommel
Erwin Rommel
Re: GP300 Error 53
Try this: start the RSS, go to service (F2), go to the TX power, turn the power one click up or down, press program (F8 I think), F10 back to the main screen and see if it works.
-
Jim2121
- Batboard $upporter
- Posts: 881
- Joined: Wed Dec 10, 2003 2:36 pm
- What radios do you own?: A few! Most I sign out!
Re: GP300 Error 53
a wattmeter or service monitor would be recommended.... Or another GP300. If another GP works that would rule out a RIB problem, Cable & pc prob! right now he can't read it...
If another GP works, or can be read, get your old codeplug back in...post your location. There are people here on the board that will service the unit for you....
If another GP works, or can be read, get your old codeplug back in...post your location. There are people here on the board that will service the unit for you....
Messages can't be intercepted if they aren't sent, can they?
Erwin Rommel
Erwin Rommel