Batboard

Hello all, Got my hands on a Astro Saber and already have the CPS. My question is: I can connect to the radio and read whats on it, but when i change ( or even dont touch anything) i cannot write the radio. Get a error screen of " Radio and Codeplug feature set are different"

Looking for help.


Thanks

The Astro Saber and the XTS series use different CPS software.

The Asto Saber uses Astro CPS and the XTS uses ASTRO25 CPS

ajpritch wrote:The Astro Saber and the XTS series use different CPS software.

The Asto Saber uses Astro CPS and the XTS uses ASTRO25 CPS

Not exactly. The Astro Saber and the XTS 3000 use the same CPS.

All other XTS models (1500, 2500, 5000) use different CPS, and the bastard-child XTS 3500 uses its own RSS.

Original poster, what version of CPS are you using?

I have both, under the ASTRO25 PORTABLE CPS : xts5000/xts4000/sse5000/xts2500/xts1500/mt1500/pr1500 are the radio listed it can do. and then right in the name of the other CPS i have is: ASTRO Saber & XTS3000 CPS

Original poster, what version of CPS are you using?[/quote]


I have version R05.02.00 would it be a conflict with if the previous computer had the ( i saw dont know if its out yet) R05.03.00

Yeah the XTS 3000 slipped the mind on that.

Also while i have you guys, what is MODAT ?

MODAT is the a form of unit signalling (a-la pre MDC). Its the infamous noise that everyone use to hear from LAPD. There is no practical application for it these days other than to play with and/or annoy people after awhile.

Pj wrote:MODAT is the a form of unit signalling (a-la pre MDC). Its the infamous noise that everyone use to hear from LAPD. There is no practical application for it these days other than to play with and/or annoy people after awhile.

gotcha, figured it was a signaling system.