Receive only on P110?

[mebroich]

I purchased some of the older VHS radios that my company used to use.
I have successfully converted the 4 and 6 channel ones to 16 channel use....now I would like to start filling up those extra channels!

On our current radios at work, we had the dealer program the local weather radio station as channel 16. I would like do the same on these older P110's, but the RSS software only gives me the choice of "conventional" modes.

Can I disable Tx on a conventional mode, or
Do I bit-bash toe .mdf some more to add option, or
do I convert them to GP300's and start from there?

I'd love to enable the built-in Vox also.

Thank You
Mike

[KX5MOT]

You should be able to type in the work "Blank" in the TX frequency field, should do the trick.

[motorola_otaku]

I think you mean VHF. :p

Anywho, to program a channel as receive only, just type "Blank" in the TX frequency spot. Sometimes just "B" and ENTER will do it.

[mebroich]

Thanks...I knew it had to be something simple. It worked like a charm. I put in all 7 NWS frequencies so we should be set for camping anywhere.

Any hints on enabling Vox?