MCS2000 Hand held control head
Moderator: Queue Moderator
MCS2000 Hand held control head
I have a UHF MCS2000 with a type II control head, Does anybody know if it is possible to adapt a hand held control head to this type of radio??
Re: MCS2000 Hand held control head
As far as I know, there was never an HHCH released for the MCS2000. I do believe there was one made for the GM950, which is the European equivalent of the MCS, but I've never heard of anyone being successful in making it work.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
Re: MCS2000 Hand held control head
I concur with that. I've never seen an MCS 2000 with an HHCH.
I believe Motorola_otaku did a write up here on the board about using an XTVA HHCH with an MCS2000 and that it was functional to a limited degree, but probably not to the degree you'd want.
I believe Motorola_otaku did a write up here on the board about using an XTVA HHCH with an MCS2000 and that it was functional to a limited degree, but probably not to the degree you'd want.
-
motorola_otaku
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: MCS2000 Hand held control head
I did, but with a HMN4044 Astro W3 head: http://batboard.batlabs.com/viewtopic.php?f=1&t=69583d119 wrote:I believe Motorola_otaku did a write up here on the board about using an XTVA HHCH with an MCS2000 and that it was functional to a limited degree, but probably not to the degree you'd want.
It's amusing for about 5 minutes, but it certainly doesn't give you true handheld control head functionality.