HT1250 VHF EEPRM CS Error

[nick.dejohn]

I got the wonderful Eprom error tonight while programming my radio. Cable came off in the middle. I have been trying to force the codeplug back into the radio and I am getting a Error 4 or something like that. Any ideas????

HELP!!!!!!!

[escomm]

Search the forums this has been discussed more times than I can count

[nick.dejohn]

I did, but nothing that talks about the Error 4 that I am getting

[nick.dejohn]

I fixed it. All set. Thanks to all

[escomm]

error codes haven't meant too much since version 6.09 for pro series

[Jim202]

So how about telling the rest of the group just how you solved your problem. That is how we all learn
and help each other here on the board.

Jim

I fixed it. All set. Thanks to all

[nick.dejohn]

So how about telling the rest of the group just how you solved your problem. That is how we all learn
and help each other here on the board.

Jim

I fixed it. All set. Thanks to all

I used software version R06.05.00 with a USB Ribless Cable and loaded the original codeplug that way. It worked on the first shot.

[jwb8734]

I got the CS Error before and did the same thing with a serial ribless and the radio came back to life.

[mikey107sec]

What about with a cable to RIB setup? Has anyone had luck getting their radio using this method? I am having the same issue only with a CDM1250.