Page 1 of 1
HT1250 VHF EEPRM CS Error
Posted: Thu Feb 05, 2009 8:02 pm
by nick.dejohn
I got the wonderful Eprom error tonight while programming my radio. Cable came off in the middle. I have been trying to force the codeplug back into the radio and I am getting a Error 4 or something like that. Any ideas????
HELP!!!!!!!
Re: HT1250 VHF EEPRM CS Error
Posted: Thu Feb 05, 2009 8:05 pm
by escomm
Search the forums this has been discussed more times than I can count
Re: HT1250 VHF EEPRM CS Error
Posted: Thu Feb 05, 2009 8:15 pm
by nick.dejohn
I did, but nothing that talks about the Error 4 that I am getting
Re: HT1250 VHF EEPRM CS Error
Posted: Thu Feb 05, 2009 8:27 pm
by nick.dejohn
I fixed it. All set. Thanks to all
Re: HT1250 VHF EEPRM CS Error
Posted: Thu Feb 05, 2009 8:31 pm
by escomm
error codes haven't meant too much since version 6.09 for pro series
Re: HT1250 VHF EEPRM CS Error
Posted: Fri Feb 06, 2009 1:05 am
by Jim202
So how about telling the rest of the group just how you solved your problem. That is how we all learn
and help each other here on the board.
Jim
nick.dejohn wrote:I fixed it. All set. Thanks to all
Re: HT1250 VHF EEPRM CS Error
Posted: Fri Feb 06, 2009 10:41 am
by nick.dejohn
Jim202 wrote:So how about telling the rest of the group just how you solved your problem. That is how we all learn
and help each other here on the board.
Jim
nick.dejohn wrote:I fixed it. All set. Thanks to all
I used software version R06.05.00 with a USB Ribless Cable and loaded the original codeplug that way. It worked on the first shot.
Re: HT1250 VHF EEPRM CS Error
Posted: Mon Feb 09, 2009 10:24 pm
by jwb8734
I got the CS Error before and did the same thing with a serial ribless and the radio came back to life.
Re: HT1250 VHF EEPRM CS Error
Posted: Mon Mar 22, 2010 8:36 pm
by mikey107sec
What about with a cable to RIB setup? Has anyone had luck getting their radio using this method? I am having the same issue only with a CDM1250.