CDM 1250 EEPROM Error

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
kc8owl
Batboard $upporter
Posts: 25
Joined: Mon Jun 23, 2003 1:44 pm

CDM 1250 EEPROM Error

Post by kc8owl »

I have a 403-470 CDM 1250 that displays "EEPROM CS ERROR" on the display when I power up the unit. When I try to read the radio using the CPS a message appears that says "Image is corrupted. Checksum for R/W Region failed"

I am guessing this is an EEPROM problem but am not sure. Can anyone advise if this is something that can be easily fixed?

Thanks .... Mike
Hamsexiness - it's more than just a look ....
Top
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: CDM 1250 EEPROM Error

Post by escomm »

Topic has been discussed here ad nauseum.

Please use the following Google advanced search link to evaluate your options: http://www.google.com/search?hl=en&as_q ... =&safe=off
Top
kc8owl
Batboard $upporter
Posts: 25
Joined: Mon Jun 23, 2003 1:44 pm

Re: CDM 1250 EEPROM Error

Post by kc8owl »

Thanks for the link.
Hamsexiness - it's more than just a look ....
Top
Karfield
Posts: 197
Joined: Tue Jan 30, 2007 7:30 am

Re: CDM 1250 EEPROM Error

Post by Karfield »

With the issue itself being as old as it is, I did want to add that the latest version of Pro Series CPS has a repair tool that will fix some of the EEPROM errors. The errors that I personally know it won't fix are model number corruption errors.

The latest version at this time is 6.11.05
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”