sorry if this belongs elsewhere - wasn't sure.
We have a WPLN4121BR Impres Gang charger, and one of the pockets will not work for *any* battery. This unit does not have the displays for each pocket. We have checked the individual fuse for the pocket and that didn't correct the issue.
Next step?
Service manual part number?
thanks.
impres charger question
Moderator: Queue Moderator
-
joescanner
- Posts: 31
- Joined: Fri Nov 30, 2001 4:00 pm
Re: impres charger question
You can try ordering part number RLN5325A, which is the PCB assy for a single pocket in an Impres MUC. Looks like it runs a tad over $100 at list.
The Impres MUC service manual is part number 6880309L66.
The Impres MUC service manual is part number 6880309L66.
-
joescanner
- Posts: 31
- Joined: Fri Nov 30, 2001 4:00 pm
Re: impres charger question
Thanks, akardam. Off to MOL to order.
I should add that when we remove and reapply power to the unit, all six pockets give a green status light during the self-test; however, we never get any status lights when charging any battery (either impres or not).
I should add that when we remove and reapply power to the unit, all six pockets give a green status light during the self-test; however, we never get any status lights when charging any battery (either impres or not).
Re: impres charger question
Take a look at the contacts, make sure there are no cold solder joints