Page 1 of 1
RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Wed Jul 08, 2009 12:58 pm
by MotoFAN
Hi all!
RLN1015C SmartRIB is compatible with Astro Sabers and XTS3000? I mean firmware update, NOT regular programming.
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Wed Jul 08, 2009 2:09 pm
by escomm
i have been using a C model SRIB for XTS3000 and Astro Saber and MTS2000 without any problems
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Thu Jul 09, 2009 12:54 am
by MotoFAN
For usual programming or for firmware upgrade?
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Thu Jul 09, 2009 4:27 am
by akardam
MotoFAN wrote:RLN1015C SmartRIB is compatible with Astro Sabers and XTS3000? I mean firmware update, NOT regular programming.
The RLN1015 SmartRIB is in fact the only RIB you can use to conduct a firmware upgrade on any of the following:
MTS2000
MCS2000
Astro Saber
XTS3000
Astro Spectra
A "C" revision SRIB will work fine to conduct upgrades on any of the above, with the exception of P25 9600 firmware for the Astro and XTS radios. This requires a "D" revision 2mb SRIB, because the size of the Host ROM firmware + the DSP ROM firmware exceeds the 1mb capacity of the "C" revision.
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Thu Jul 09, 2009 5:11 am
by MotoFAN
Ok, thank you very much for comprehensive response!
with the exception of P25 9600 firmware for the Astro and XTS radios
You mean not common 800 MHz only firmware discussed here
http://batboard.batlabs.com/viewtopic.php?f=4&t=36815 ?
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Thu Jul 09, 2009 5:14 am
by MotoFAN
I want to upgrade XTS3000 to the current Host/DSP versions: 07.71.06 / 08.03.05. I hopes that these Host/DSP not special versions with 9600 Trunking. Correct?
C revision of SmartRIB will work for them?
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Thu Jul 09, 2009 5:16 am
by akardam
As has been discussed before, the P25 9600 firmware for the Astro and XTS radios only works on 800MHz trunking. It does not work for OBT.
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Sun Oct 25, 2009 1:24 am
by MotoFAN
I tried recently and RLN1015C works fine.
First upgrade of XTS3000 taken about 20 minutes! SRIB firmware upgrade?
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Sun Oct 25, 2009 9:12 am
by Mfire39
MotoFAN wrote:First upgrade of XTS3000 taken about 20 minutes! SRIB firmware upgrade?
The .cvn firmware file uploads to the srib first, and then to the radio.. If you were doing more than one upgrade of the same type of radio, you would only have to wait for it to write the firmware to the radio for the second one, and not to the srib again if using the same .cvn..
-Marc
Re: RLN1015C SmartRIB will work for Astro Sabers & XTS3000?
Posted: Sun Oct 25, 2009 9:46 am
by MotoFAN
Mfire39 wrote:The .cvn firmware file uploads to the srib first, and then to the radio.. If you were doing more than one upgrade of the same type of radio, you would only have to wait for it to write the firmware to the radio for the second one, and not to the srib again if using the same .cvn.
Ok, thanks for explanation!
But SRIB is upgradable or no?