Power amp connector

[MattSR]

Hi guys,

I recently bought a TPL power amp - a PA6 - which is the same type that is Motorola OEM'd with the XTVA kits. Problem i've got is that the power connector is shagged. two peices of light duty 9-volt snap on type wire have been glued into te back oif the connector, and filled with silicone sealant, a cable tie placed around it to hold it together, and then covered in heatshrink to make it look ok.

Obviously I need to source a replacement - any ideas, apart from Motorola, where I can get these babies from?

Cheers,
Matt

[MattSR]

Wicked. used the search and found a post with the info

http://batboard.batlabs.com/viewtopic.php?f=6&t=61964


Plz lock thread.