msf5000 power molex
Moderator: Queue Moderator
msf5000 power molex
does anybody know how to attach non original power supply to the msf5000...the interconnect board under the oscilators? what is the pinout on the molex connector J596A? is there any other voltage supply to this connector other than 14V DC? what color is the ground wire?
Re: msf5000 power molex
My two bits worth:
Pin 1 RED A+ to control tray.
2 White A+ to Casting
4 Black Ground
NEVER supply A+ to the control chassis with OUT the 9.6 reference which comes from the IPA module in the casting.
The station is programmed on the R1800 programmer. I can make code plugs for this station.
Pin 1 RED A+ to control tray.
2 White A+ to Casting
4 Black Ground
NEVER supply A+ to the control chassis with OUT the 9.6 reference which comes from the IPA module in the casting.
The station is programmed on the R1800 programmer. I can make code plugs for this station.
Aloha, Bernie
Re: msf5000 power molex
thank you! do you know how to adjust the trip alarm on MSF5000 trough the programming software, i have 7 beeps forward signal alarm from time to time. i have tried the field combination of switches and it does change only 2 settings. i need the F00. cant get to change it to F00 with the switches...