ASTRO 25 R13.00.01 RELEASED

[n3obl]

===============================================
ASTRO 25 Portable CPS R13.00.01
===============================================

- VISTA with Service Pack 1 is supported in R12.00.00 CPS and higher!
(see 'For VISTA Users' section below).

- If both portable and mobile CPS's are used, it is recommended to update
both at the same time, and tutorials should be installed with BOTH versions.

- POP25 feature is NOT supported with VISTA operating system.


New Radio Features Supported:
=============================
NOTE: FIRMWARE VERSION R12.00.17 or HIGHER IS REQUIRED FOR THE
FOLLOWING FEATURES TO WORK IN THE RADIO:

- External Accessory Support

- Random Holdoff Timer support

Detailed information for each of these features can be found in the CPS
help. Help can be accessed from the CPS menu by selecting Help-> CPS Help
Topics.


Customer Reported Issue Resolved:
==================================

- "Secure/Clear Mode" is now available on Buttons for XTS 1500 Model 1.5.

- Successfully program radios via OTAP Batch Programmer.

- Can adjust Minimum Alert Tone and Audio Volume settings.

------------

============================================
ASTRO 25 Mobile CPS R13.00.01
============================================

- VISTA with Service Pack 1 is supported in R12.00.00 CPS and higher!
(see 'For VISTA Users' section below).

- If both portable and mobile CPS's are used, it is recommended to
update both at the same time, and tutorials should be installed
with BOTH versions.

- POP25 feature is NOT supported with VISTA operating system.


New Radio Features Supported:
=============================

- External Accessory support
Note: Firmware version R12.00.17 or higher is required for this
feature to work in the radio.

- Random Holdoff Timer support
Note: Firmware version R12.00.17 or higher is required for this
feature to work in the radio.

- Broadcast Data for HPD 1000
Note: Future Radio feature. Please check firmware release notes for details.

Detailed information for each of these features can be found in the
CPS help. Help can be accessed from the CPS menu by selecting Help->
CPS Help Topics.


Customer Reported Issues Resolved:
==================================

- 700 MHz Base Frequency for HPD 1000

- Successfully program radios via OTAP Batch Programmer.


Frank