quantro cos

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
User avatar
sb
Posts: 88
Joined: Sun Sep 09, 2001 4:00 pm

quantro cos

Post by sb »

Hi!

I have quantro set up as analog ham repeater. I want to add link radio. As described on repeater-builder.com I used pins on J17 for PTT and COS. PTT works but COS not.
Any idea ??
Last edited by sb on Fri Sep 04, 2009 10:02 am, edited 1 time in total.
Beno, s56kz
Top
Batwings21
Posts: 930
Joined: Fri Jun 23, 2006 11:21 am

Re: quantro cos

Post by Batwings21 »

I've never attached an external controller to a quantar/quantro, but on the mtr there are mrti connections that would work, but the mrti interface has to be turned on. Maybe your cos pin is controlled by the mrti enable/ disable option?
Top
User avatar
sb
Posts: 88
Joined: Sun Sep 09, 2001 4:00 pm

Re: quantro cos

Post by sb »

Hi!

I solved the problem and hoked GM350 to Quantro. COS worked it was mine mistake.

This is how I done the connection.

Image
Beno, s56kz
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”