Batboard

Hi!

I have quantro set up as analog ham repeater. I want to add link radio. As described on repeater-builder.com I used pins on J17 for PTT and COS. PTT works but COS not.
Any idea ??

I've never attached an external controller to a quantar/quantro, but on the mtr there are mrti connections that would work, but the mrti interface has to be turned on. Maybe your cos pin is controlled by the mrti enable/ disable option?

Hi!

I solved the problem and hoked GM350 to Quantro. COS worked it was mine mistake.

This is how I done the connection.