Hi there
Have someone theSet of commands that can control the radios series of MCS2000/ MTS2000 / GM1200
via the RIB ?
Such as Direct frequency entry ETC ? And what is the Baud rate ?
Im not meaning programming the radios Internal Channels and modes /// only controlling the radio externaly via its bus and a rib
Thanks For any info .....
Ronen- 4Z4ZQ
Ronen Pinchooks (4Z4ZQ) WebSite
Commands to control MTS MCS Radios ?
Moderator: Queue Moderator
Re: Commands to control MTS MCS Radios ?
If you obtain the service manual for the MCS2000 radio, you will find a couple of pages with some of the info
you may be looking for.
There was a web site that I did a search for SB9600 radio control and found about 2 years ago. Don't know if
the info is still up. One point I will make is that the SB9600 is a standard that has been under a number of
pattents and as such is public information. Motorola has chosen to use it for controlling their radios and as
such has limited access to the commands and data that the radios use. They consider the buss to be part
of their intellectual property rights.
It is not that hard to put a logic box or software program to read the data that is on the buss.
Proceed at your own risk.
Jim
you may be looking for.
There was a web site that I did a search for SB9600 radio control and found about 2 years ago. Don't know if
the info is still up. One point I will make is that the SB9600 is a standard that has been under a number of
pattents and as such is public information. Motorola has chosen to use it for controlling their radios and as
such has limited access to the commands and data that the radios use. They consider the buss to be part
of their intellectual property rights.
It is not that hard to put a logic box or software program to read the data that is on the buss.
Proceed at your own risk.
Jim
ronenp wrote:Hi there
Have someone theSet of commands that can control the radios series of MCS2000/ MTS2000 / GM1200
via the RIB ?
Such as Direct frequency entry ETC ? And what is the Baud rate ?
Im not meaning programming the radios Internal Channels and modes /// only controlling the radio externaly via its bus and a rib
Thanks For any info .....
Ronen- 4Z4ZQ
Ronen Pinchooks (4Z4ZQ) WebSite