Page 1 of 1
M1225/P1225
Posted: Fri Sep 25, 2009 1:31 pm
by funsun71
If I recall correctly, the early versions of these radios were either wide or narrow and not programmable on a per channel basis. Later versions were programmable on a per channel basis. Can anybody confirm this is the case, and if so, how to tell difference?
Re: M1225/P1225
Posted: Fri Sep 25, 2009 3:07 pm
by Will
The "1225" does both 25 khz and 12.5 khz channel spacing.
Re: M1225/P1225
Posted: Fri Sep 25, 2009 8:02 pm
by Bill_G
Every one I ever touched had the bandwidth programmable per channel. I do not recall a global setting for narrow or wide. I have no way to confirm the earliest versions were otherwise.
Re: M1225/P1225
Posted: Fri Sep 25, 2009 9:37 pm
by 35echo
From the first production run until cancellation these were programable 12.5K/25K per CHANNEL not radio wide.
Regards,
Allen