APX 7000 NNTN7526A Dongle
Moderator: Queue Moderator
APX 7000 NNTN7526A Dongle
Just getting started in CPS and getting set up to programming APX7000 units. Do I need the NNTN7526A Dongle
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: APX 7000 NNTN7526A Dongle
If you don't have the programming manual then maybe there's a section in the CPS help file that will answer your question. CPS help files can be pretty dense and sometimes difficult to understand but all the information needed is usually there.
You may also find this thread helpful: http://batboard.batlabs.com/viewtopic.php?f=4&t=86038
And you're going to have to know and understand the flashcode of your radios as well. Here's where you can decode that data:
http://www.akardam.net/moto/tools/decod ... =flashcode
Be sure after you enter your flashcode that you check the "portable" box in the APX column.
You may also find this thread helpful: http://batboard.batlabs.com/viewtopic.php?f=4&t=86038
And you're going to have to know and understand the flashcode of your radios as well. Here's where you can decode that data:
http://www.akardam.net/moto/tools/decod ... =flashcode
Be sure after you enter your flashcode that you check the "portable" box in the APX column.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: APX 7000 NNTN7526A Dongle
That dongle is for FPP (front panel programming) and has to be turned on with a flash upgrade.