APX 7000 NNTN7526A Dongle
Posted: Tue Dec 22, 2009 8:02 am
Just getting started in CPS and getting set up to programming APX7000 units. Do I need the NNTN7526A Dongle
If you don't have the programming manual then maybe there's a section in the CPS help file that will answer your question. CPS help files can be pretty dense and sometimes difficult to understand but all the information needed is usually there.
You may also find this thread helpful: http://batboard.batlabs.com/viewtopic.php?f=4&t=86038
And you're going to have to know and understand the flashcode of your radios as well. Here's where you can decode that data:
http://www.akardam.net/moto/tools/decod ... =flashcode
Be sure after you enter your flashcode that you check the "portable" box in the APX column.