moto m1225 usb cable

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
jstinnett
New User
Posts: 2
Joined: Fri Apr 30, 2010 1:00 pm

moto m1225 usb cable

Post by jstinnett »

I have been looking everywhere for the pinout for a usb cable for the m1225. If anyone can help me that would be great if no with a usb can anyone help me with a ribless cable pinout?
PETNRDX
Posts: 872
Joined: Sun Nov 25, 2001 4:00 pm
What radios do you own?: Too many

Re: moto m1225 usb cable

Post by PETNRDX »

Its the same as a Maxtrac/Radius/GM300/SM50/SM120 etc.
Different software, but same RIB cable or Ribless.
Steve K.
jstinnett
New User
Posts: 2
Joined: Fri Apr 30, 2010 1:00 pm

Re: moto m1225 usb cable

Post by jstinnett »

I have searched and only found the pinout for the rib cable. I am looking to make one ribless.
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: moto m1225 usb cable

Post by Tom in D.C. »

A "ribless" cable for a radio that requires a RIB is actually just a cable with the RIB built into the connector. A true "ribless" cable
is found only on later radios which use GUI, not DOS, programs, such as the XTS series radios. If you have only a USB port available why don't you get a USB-to-serial adapter, a standard RIB and a Maxtrac cable.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Post Reply

Return to “Radio Programming”