Caller ID on XTS5000

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

Caller ID on XTS5000

Post by joes243 »

Hello-
I have just puchased a used xts5000 to be used on conventional channels. The seller stated that the radio did decode and display mdc ids. I can not get it to work. The "Feature Set" has the following...

H35 - Conventional Systems Opertation
Q806 - ASTRO Digitial Operation
Q446 - Channel Announcement
Q445 - Fireground Accountability Software

There is no G114 which I read is needed to display IDs. Is that correct? If so, how much would adding that to the feature set cost? Would M even sell that one option for 1 radio?

Thanks.
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: Caller ID on XTS5000

Post by Tom in D.C. »

Read and post the host and DSP for your radio. That's the key to figuring out what can and can not be done with you radio as it now stands. Also the flashcode itself, just to double-check what you've already figured out.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

Re: Caller ID on XTS5000

Post by joes243 »

The current flashcode is 100001-000003-4
I dont have the radio in front of me right now but I want to say 12.00.11 for the firmware? I am not sure of the 11 but it is 12.00.xx

Thanks!
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

Re: Caller ID on XTS5000

Post by joes243 »

I got the info...
Host=12.00.11
DSP=12.00.01
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: Caller ID on XTS5000

Post by Mfire39 »

joes243 wrote:The seller stated that the radio did decode and display mdc ids.
The seller was full of it. Without H14 ID display in the flashcode, that 5000 isn't going to decode and display any MDC ID's..


-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

Re: Caller ID on XTS5000

Post by joes243 »

Yea, I know Marc. Any ideas on how to go about adding this? Is it something a local M shop can handle?
jmr061
was KB9KST
Posts: 3176
Joined: Fri Sep 14, 2001 4:00 pm

Re: Caller ID on XTS5000

Post by jmr061 »

They should be able to, if they will do it is another question. If it hasn't changed ID Display is usually a $75(US) option. The shop would probably tac on for labor.

Jason
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

Re: Caller ID on XTS5000

Post by joes243 »

Thanks. I read on some posts you can get it strait from M. Is that a hard thing to do?
User avatar
Pj
Moderator
Posts: 5147
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: X9000 thru APX

Re: Caller ID on XTS5000

Post by Pj »

You need to speak with a Motorola dealer who deals with this tier of radio..not the ones that do the mickey mouse moto radios. Ask your local FD/PD's on who services their radios. Those are the people to deal with.

Or

Motorola.com and do the dealer locator.
Lowband radio. The original and non-complicated wide area interoperable communications system
Image
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

Re: Caller ID on XTS5000

Post by joes243 »

Pj wrote:..not the ones that do the mickey mouse moto radios. Ask your local FD/PD's on who services their radios.
I am on the FD and our dealer does the "mickey mouse" radios. The highest end radio I have seen them deal is the Pro series. I have a police officer friend thats department just went to a trunked system and got all new xts5000. I will ask him who does theirs. Should I not even try to get it directly from M?
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”