code plug need

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
taksin25
Posts: 38
Joined: Tue Jun 25, 2002 12:58 am

code plug need

Post by taksin25 »

I'm looking for code plug of Maxtrac D45MWA5GC6 model
EKLB
Gone...as per his request
Posts: 690
Joined: Mon Jun 17, 2002 4:13 am

Post by EKLB »

Well i qeuss i owe some help to this board again.

Your asking for the code plug to a d45mwa5gc6 radio.

What i have is the code plug for a d35mwagb6 radio.

I believe the only difference is yours is the high power version=35 watts
and mine is the low power 15 watt radio.

Otherwise my codeplug should work for you .

Id check to make sure the gc6 and gb6 part of the model number are still the same though between both radios.

And if it helps you in anyway the d35mwa5gb6 radio has the rf bd #hff9122a with a logic bd #hln5172a with ic #hln9260c=v52.07

It is a maxtrac 840 with a range of 806 to 870 mhz.

Will do 2 conventional modes.

Trunked personalities of 6 with 6 subfleets.

Total modes = 38

A d45 = 35 watts A d35 = 15 watts

If this will do the trick leave a pm with your email address and you shall recieve.

EKLB
John
Posts: 387
Joined: Sun Sep 09, 2001 4:00 pm

Post by John »

A B6 is Privacy Plus while a C6 is Smartnet. They use different ROMs on the command board. Email me and I will send you the correct codeplug.

John
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”