MSF 5000 Setting Power Out

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
RoGo 1
Posts: 7
Joined: Mon Jan 15, 2007 9:09 pm

MSF 5000 Setting Power Out

Post by RoGo 1 »

I have a 75 Watt 900Mhz MSF. The manual says to set the power to 80W, but it does not say where to measure that power. Do I measure it right out of the PA or do I measure it after their circulator and low pass filter?

Thanks
Rogo 1
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: MSF 5000 Setting Power Out

Post by Will »

RoGo 1 wrote:I have a 75 Watt 900Mhz MSF. The manual says to set the power to 80W, but it does not say where to measure that power. Do I measure it right out of the PA or do I measure it after their circulator and low pass filter?

Thanks
Rogo 1
Measure the transmitter power output after the low pass filter.
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”