Page 1 of 1
MSF 5000 Setting Power Out
Posted: Sat Sep 18, 2010 12:54 pm
by RoGo 1
I have a 75 Watt 900Mhz MSF. The manual says to set the power to 80W, but it does not say where to measure that power. Do I measure it right out of the PA or do I measure it after their circulator and low pass filter?
Thanks
Rogo 1
Re: MSF 5000 Setting Power Out
Posted: Sun Sep 19, 2010 4:17 pm
by Will
RoGo 1 wrote:I have a 75 Watt 900Mhz MSF. The manual says to set the power to 80W, but it does not say where to measure that power. Do I measure it right out of the PA or do I measure it after their circulator and low pass filter?
Thanks
Rogo 1
Measure the transmitter power output after the low pass filter.